Escort Automobile Electronics 432 User Manual

Features and Monitor Controls

Monitor Installation

Camera Installation

Monitor

• Install the monitor on the windshield of the car.

• Don’t install the monitor in an extremely hot or humid place

(radiator, air duct, etc.) or in a place subject to direct sunlight,

excessive dust, mechanical vibration or shock.

• The monitor is not waterproof.

• Use a silicon waterproof tape to wrap the connector of camera

and extension cable to ensure waterproof.

Speciﬁcally designed for passenger cars, trucks and SUVs.

• Supports single camera input.

• Protect the cable by using conduit or running the cable inside the

• High-low voltage and short-circuit protection.

• Suction cup bracket installation.

vehicle as much as possible.

• Automatically displays reverse camera view when reverse gear

is engaged.

Attach the supplied bracket to the glass or ﬂat area and make

sure it’s ﬁrmly aﬃxed.

Camera

R E A R V I E W C A M E R A S Y S T E M

• CMOS camera in mini size.

• Three-color proximity guide.

• Operates over a wide temperature range.

First, ﬁnd the

best position

and angle.

Second, rotate

the bracket and

ﬁx it ﬁrmly.

System power ON/OFF

Adjust the angle of

the monitor and

fasten the back

screw ﬁrmly.

Owner’s Manual